“We are always serving our customers with our very best items.” Furthermore, WE CAN Generate Personalized VARIATORS, GEARED MOTORS, Electrical MOTORS AND OTHER HYDRAULIC Merchandise According TO CUSTOMERS’ DRAWINGS. EPG will usually adhere to it company spirit of getting practical, progressive, efficient and superb to make the prime worldwide transmission push. 200W 104 Series Of Brushless DC Equipment EPTs
Standard Qualities Of EPT
#8226200W (DC EPT EPT When Applied To 24VDC/36VDC/48VDC)
|
Rated EPT (Ongoing) |
W |
200 (200W/400W) |
|||
|
Rated velocity |
r/min |
2500 |
|||
|
Rated torque |
N.m |
.764 |
|||
|
Instantaneous maXiHu (West Lake) Dis.mum torque |
N.m |
one.146 |
|||
|
Rotor moment of inertia |
J:X10-4kg.m2 |
.460 |
|||
|
Speed handle selection |
RPM |
Large strain two hundred-2500RPM (Lower pressure 200-3000RPM) |
|||
|
Velocity management variety |
On load |
Beneath plusmn 1 %: condition ~ rated torque, rated speed, rated voltage, room temperature |
|||
|
On voltage |
Beneath plusmn1%: problem rated voltage plusmn10%, rated speed, rated load, place temperature |
||||
|
On temperature |
Under plusmn1%: Situations of ambient temperature ~ 40 degC rated voltage, rated load and rated velocity |
||||
|
EPT input |
Rated voltage |
V |
Single section 110V |
Single period 220V | 36VDC(Optional 48VDC) |
|
Voltage tolerance assortment |
plusmn10% |
||||
|
Frequency |
Hz |
50/60 |
/ |
||
|
Frequency tolerance assortment |
plusmn5% |
/ |
|||
|
Rated input current |
A |
four.seven |
two.four |
seven.5 |
|
|
Instantaneous maXiHu (West Lake) Dis.mum enter existing |
A |
9. |
4.8 |
eleven.5 |
|
Merchandise Description
Circular Shaft Kind Optical EPT
#8226Z6BLD200-()A-30S()-Voltage 24/36/48/a hundred and ten/220
#8226Z6BLD200-220A-30S Diagram(ZD StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Travel)
1.Connector: 5557-8R/10R (M0LEX) 2.EPT wire size 300mm three.Spherical terminal: SRA-21T-4 (Reduced ground)
#8226Lower Voltage Wrie Plughole Corresp-onding EPTal Explanation
|
plughole |
one |
2 |
3 |
four |
|
sign |
U |
W |
Hv |
Hu |
|
plughole |
five |
6 |
seven |
eight |
|
sign |
V |
GND |
Hw |
Vcc |
#8226High Voltage Wrie Plughole Corresp-onding EPTal Rationalization
| Corresponding meaning | |||||||||
|
one |
two |
3 |
4 |
five |
6 |
7 |
eight |
9 |
ten |
|
Blue (coarse) |
Yellow (fantastic) |
Yellow (coarse) |
Green (fantastic) |
Environmentally friendly (coarse) |
Blue (fine) |
EPT mesh |
Crimson (good) |
Black (fine) |
|
|
W |
Hu |
U |
Hv |
V |
Hw |
Vcc 5V |
GND |
||
#8226PXiHu (West Lake) Dis.Hu (West Lake) Dis.lel Shaft Speed EPT
Z6BLD200-24GUL-30S(6GU40LC)-Voltage 24/36/forty eight/a hundred and ten/220 ()-Velocity Ratio Value
one.Connector:5557-8R/10R(MOLEX) two.The sheath duration of guide line 300mm 3.Spherical terminal:SRA-21T-four
#8226Decimal Gearhead
5GN()XK-Velocity Ratio Value, EPTly 10
|
Gearhead Model |
Gear Ratio |
L Dimension |
|
6GU()K |
3-two hundred |
72 |
#8226EPTr the EPT ratio in the box () inside of the product title
#8226Z6BLD200-()GU-25S/6GU()K EPT Allowable Torque (Device: N.m)
|
Design |
EPTSpeed/Reduction Ratio |
3 |
three.6 |
five |
6 |
seven.5 |
nine |
12.five |
15 |
18 |
twenty five |
thirty |
36 |
50 |
sixty |
75 |
90 |
100 |
120 |
a hundred and fifty |
one hundred eighty |
two hundred |
|
200~1500RPM |
2.41 |
two.90 |
4.02 |
four.83 |
6.03 |
seven.24 |
9.06 |
ten.9 |
thirteen.one |
sixteen.4 |
19.7 |
23.six |
32.8 |
39.three |
40. |
40. |
forty. |
forty. |
40. |
40. |
40. |
|
|
Z6BLD200-()GU |
2000RPM |
two.04 |
2.45 |
three.forty |
4.08 |
five.eleven |
six.13 |
7.67 |
9.twenty |
eleven. |
thirteen.9 |
sixteen.six |
20. |
27.seven |
33.three |
40. |
forty. |
40. |
40. |
40. |
forty. |
forty. |
|
2500RPM |
1.86 |
two.23 |
3.09 |
three.seventy one |
four.sixty four |
five.57 |
six.ninety seven |
eight.37 |
ten. |
12.6 |
15.1 |
18.two |
25.two |
thirty.3 |
37.8 |
40. |
forty. |
40. |
40. |
40. |
40. |
#8226L Variety Velocity EPTNotice :The() (grey) in the desk indicates that the rotation course is constant with the motor.(The torque unEPTdifferent velocity and velocity ratio is acquired unEPTthe ZD stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd.)
1.Connector: 5557-8R/10R (MOLEX ) 2.EPT wire size 300mm three.Round terminal: SRA-21T-4 (Lower ground)
#8226Z6BLD200-()GUL-25S/6GU()LC EPT Allowable Torque (Device: N.m)
|
EPTSpeed/Reduction Ratio |
five |
10 |
15 |
20 |
thirty |
50 |
one hundred |
two hundred |
|
200~1500RPM |
four.02 |
8.04 |
12.one |
16.one |
21.eight |
36.three |
72.5 |
one hundred twenty |
|
2000RPM |
3.40 |
6.81 |
10.two |
thirteen.six |
eighteen.4 |
30.7 |
sixty one.three |
one hundred ten |
|
2500RPM |
2.seventy nine |
5.58 |
eight.37 |
11.2 |
sixteen.7 |
27.nine |
fifty five.8 |
a hundred |
Notice :All EPT output switch course in kind are opposite as motor change route.(The torque unEPTdifferent speed and velocity ratio is received unEPTthe ZD stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd.)
#8226Arc Cone RigEPT Angle Velocity EPT EPT
Z6BLD200-()GU-25S/6GU()RC()-Voltage 24/36/48/110/220 ()-Velocity Ratio Price
Z6BLD200-()GU-25S/6GU()RT()-Voltage 24/36/forty eight/one hundred ten/220 ()-Velocity Ratio Worth
one.Connector: 5557-8R/10R (MOLEX ) two.The sheath length of direct line 300mm three.Round terminal: SRA-21T-4 (Low floor)
#8226 Z6BLD200-()GU-25S/6GU()RC/RT EPT Allowable Torque (Device: N.m)
|
Design |
EPTSpeed/Reduction Ratio |
7.5 |
nine |
12.5 |
15 |
18 |
25 |
30 |
36 |
50 |
60 |
seventy five |
ninety |
a hundred |
one hundred twenty |
one hundred fifty |
180 |
200 |
|
two hundred~1500RPM |
six.03 |
seven.24 |
9.06 |
ten.9 |
thirteen.1 |
16.four |
19.7 |
23.six |
32.eight |
39.three |
forty. |
forty. |
40. |
40. |
40. |
40. |
40. |
|
|
Z6BLD200-()GU |
2000RPM |
5.23 |
6.27 |
8.seventy one |
10.five |
twelve.six |
17.4 |
twenty.nine |
25.one |
31.five |
37.8 |
forty. |
forty. |
forty. |
forty. |
40. |
40. |
40. |
|
2500RPM |
4.eighteen |
5.02 |
six.97 |
eight.37 |
ten. |
thirteen.9 |
sixteen.seven |
twenty.one |
twenty five.two |
30.3 |
37.eight |
forty. |
forty. |
40. |
40. |
forty. |
40. |
Note :The (grey) in the desk implies that the rotation direction is consistent with the motor.(The torque unEPTdifferent speed and velocity ratio is received unEPTthe ZD stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd.)
Organization Data
FAQ
Q: What’re your major goods?
A: We currently produce Brushed Dc EPTs, Brushed Dc Equipment EPTs, Planetary Dc Gear EPTs, Brushless Dc EPTs, Stepper motors, Ac EPTs and Large EPT Planetary Equipment Box and many others. You can verify the specs for above motors on our website and you can e mail us to recommend required motors per your specification as well.
Q: How to choose a appropriate motor?
A:If you have motor pictures or drawings to show us, or you have in depth specs like voltage, pace, torque, motor measurement, working method of the motor, necessary lifetime and sounds amount and so on, remember to do not wait to enable us know, then we can advise suitable motor per your ask for appropriately.
Q: Do you have a tailored provider for your stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd motors?
A: Yes, we can personalize per your ask for for the voltage, speed, torque and shaft measurement/condition. If you require added wires/cables soldered on the terminal or want to add connectors, or capacitors or EMC we can make it also.
Q: Do you have an person design service for motors?
A: Of course, we would like to style motors independently for our customers, but it may need some mould deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ing EPT and style cost.
Q: What is your guide time?
A: EPTly sEPTing, our normal stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd merchandise will want fifteen-30days, a bit EPTer for custom-made goods. But we are quite fleXiHu (West Lake) Dis.ble on the direct time, it will depend on the certain orders.
You should contact us if you have in depth requests, thank you
